Anticipate Growth When Planning An On-Farm Grain Storage System

growth

ASSUMPTION, Ill., (April 22, 2015) – When planning an on-farm grain storage system, one of the most important steps is taking into account future expansion needs, according to Gary Woodruff, conditioning applications manager for GSI.

“Farmers should always assume there will be growth in yield and bushels,” Woodruff says. “Always anticipate expanding and have a well-thought out plan that factors in growth and future technology changes.”

Woodruff recommends:

• Always leave space for future installation of additional bins.

• Do not assume that your wet holding capacity will always be adequate. Once you start drying more grain, additional wet bushel storage capacity will be a necessity.

• Create a traffic pattern for separate grain dumping and loading stations to increase efficiency. Being able to load and unload grain simultaneously will decrease your total harvest time, thus saving money.

• Future expansion of both drying and wet storage must be part of the initial design. Choose an in-bin or out-of-bin high capacity drying system to match your farm needs. As the total number of bushels increases, plan on adding a higher capacity dryer or a second one.

• The different kinds of grain to be stored will determine the number of bins needed. If you are storing three types of grain, you will need three bins, even though the sizes will vary. Rather than putting a large quantity of one grain in a single bin, it may be better to invest in two or three smaller bins, which will be easier to manage and offer more flexibility.


Locating your grain storage system

Storage location is another key factor, according to Woodruff. An on-farm grain storage system ideally should be located on a state highway that allows farmers to haul grain year-round without road restrictions. A good highway site should either have access to natural gas, which is the most economical fuel source, or allow easier delivery of the more available LP gas.

A highway location is also more likely to have three-phase power available, which allows operation of much larger machines and motors. For smaller systems, single phase power may be sufficient, but more power will be needed as the system expands.

He adds that farmers should locate the system near their fields, which will reduce transportation time and fuel cost, and ultimately can lead to a cut in the number of trucks needed.

“No two farms are exactly alike, which is why a grain storage system must be designed to meet each farm’s current and future needs,” Woodruff says. “A poorly designed on-farm grain storage system may increase labor, reduce efficiency and create safety issues that a well-planned system avoids.”



ABOUT GSI

GSI (Grain Systems Inc.), a global brand of AGCO (NYSE: AGCO), is an industry leader and manufacturer of steel farm bins, commercial storage grain bins and grain silos. In addition, GSI offers the most technologically advanced grain dryers in the industry and a large selection of material handling systems, including bucket elevators and conveyors, grain bin sweeps and chain loop systems. GSI is also a full-line manufacturer of protein production systems for swine and poultry operations. With more than 40 years of industry expertise, GSI is your proven and dependable source for forward-thinking grain and protein agribusiness solutions. www.grainsystems.com


Media Contacts

Randy Myers

randy.myers@osbornbarr.com

314-746-1929

Lena Swearingen

lswearingen@gsiag.com

217-226-5193