Network Control System
Easy to wire and simple to use, GSI's patented Network Control System offers computerized control of all dryer functions.

Network Dryer Specifications


GSI dryers feature a totally computerized 12 volt DC safety system with the capability of monitoring a comprehensive set of safety controls. Each drying chamber is equipped with temperature high limit controls and air pressure sensors. Fan housing temperature limit, vaporizer temperature limit, metering roll rotation and flame detection are mounted as well. The dryer is equipped with a rear discharge shutdown switch. GSI's exclusive memory monitor allows the last 256 safety shutdowns to be recalled, along with time, date and cause of shutdown.

Cutting Edge Controls
GSI's Network Control System (NCS) eliminates the guesswork by relaying instant information to the operator via a large backlit LCD display. The memory features in the unit maintain a history of past dryer operation and a permanent service record. The NCS also calculates total dryer time, bushels per hour and total bushels dried. It eliminates 99% of all moving parts in the control box, such as troublesome timers, mechanical relays and time delays.

Control Hardware
When stacking a dryer, the number of control wires has been greatly reduced to ease operation setup. GSI has reduced the number of control wires to connect from over 100 down to five. The computerized controls are housed in an all galvanized control box that features double sealed doors and no-weld construction. All dryer operations can be viewed through UV protected safety glass. All electronics are extensively protected against electrical spikes and surges. There is also a main safety disconnect circuit breaker located on the outside of the main control box. All temperatures on the dryer can be monitored and adjusted from the ground at the main control box. Auxiliary load and unload connections are provided. It is designed to be the ultimate protection for computerized components in a rugged grain drying environment.