|
Home | About GSI | Sales & Support |
|
Bin Sweeps --|--Portable Augers --|--Elevators & Conveyors--|--Chain Loop--|--Flex-Flo™ Delivery |
| |
 Center
Drive AugersGSI offers low cost, low maintenance, and highly efficient Center Drive augers with heavy-duty 7 gauge steel flighting on 8'' (203.2mm) and 10'' (254mm) augers. The main auger tubes are made of rugged 14 gauge galvanized steel. 15' flighting sections make replacement much easier. All flighting is teflon coated to reduce weathering during shipping or storage and is approved for food grade applications. |
|
|||
|
|
||||
 |
Three
Shafted Gear Box A three shafted gear box drives the flighting from the center line of the auger. The center drive gear box is located inside the bell and connects the lower and upper flighting in the center of the grain flow. The exterior tube is widened in a bell shape to allow unobstructed, fast flowing grain to pass around the gear box quickly. This internally mounted gear box helps to minimize the number of moving parts which reduces costly maintenance. |
||||
 |
Track
Assembly Steel rollers on a double angle-iron track assembly provides support and assures smooth raising and lowering of the auger. We feature a track stop that will not allow the auger to be raised higher than intended. |
||||
 |
Undercarriage A uniquely designed pivot system on the undercarriage makes raising and lowering a cinch. Heavy duty steel tubing and a wide axle gives strength and stability. |
||||
|
Bell
Cleanout Door The cleanout door, located on the bottom of the bell, allows for convenient inspection and cleanout of the auger's bell area. The door can be easily unbolted and removed quickly. |
||||
 |
Hooks
and Cables Guide hooks help keep the cable from sliding off the guide roller. Our cable is aerospace grade cable for durability and strength to last a lifetime. |
||||
 |
Intake The auger intake has double flighting to increase capacity. The flighting is made of extra heavy gauge steel and is teflon coated to prevent weather during shipping or storage. A guard is welded over the flighting for additional operator protection. |
||||
 |
PTO
Drive Shaft You can choose either PTO or electric drives. It can be driven from either the right or left side and a band-on support provides saddle side lock-up for transport. |
||||
 |
Manual
Winch The manual winch comes standard and is designed to fit the size of the auger. All augers come with owners manual in a weather tight tube, keeping it right at your fingertips. |
||||
|
|
|
|
|
|
|
|||
|
Center
Drive Sizes
|
|||||||||
|
Dia.
|
Capacity
(BPH) |
Length
|
|||||||
|
|
|||||||||
|
8"
|
3200
|
32'
|
37'
|
42'
|
52'
|
62'
|
72'
|
|
|
Meters
|
.203
|
9.8
|
11.3
|
12.8
|
15.9
|
18.9
|
21.9
|
|
|
10"
|
4500
|
32'
|
37'
|
42'
|
52'
|
62'
|
72'
|
|
|
Meters
|
.254
|
9.8
|
11.3
|
12.8
|
15.9
|
18.9
|
21.9
|
|
| Optional
Hydraulic Lift available on 8" size augers 52' and longer and
on 10" size augers 52' and longer. Due to continual improvements, GSI designs and specifications are subject to change without notice. |
|||||||||