|
Home | About GSI | Sales & Support |
|
Bin Sweeps --|--Elevators & Conveyors--|--Chain Loop--|--Flex-Flo™ Delivery |
|
Standard
Bin Sweep The standard bin sweep auger comes in 3 sizes: 6" (152.4mm), 8" (203.2mm), and 10" (254mm). The standard sweep can be used with bins ranging in size from 15' (4.58m) to 42' (12.8m). Sweep augers can be removed easily for placement into another bin of the same size. |
|
|||
|
|
||||
|
|||||
 |
Close
Floor Clearance The torque tube and backup shield adjust for close floor clearance so you get maximum bin cleanup, removing grain in one or two revolutions. On the end of the sweep, a rubber wheel supports the auger flighting and provides traction as the sweep rotates. If your bin is 30' (9.14m) or larger, an intermediate bearing is included to help stabilize the sweep flighting. All our sweeps have sealed, self-aligning bearings to reduce replacement costs. Center wells have a 1" (25.4mm) inner diameter pivot socket. You have the option of using a 4" (101.6mm) depth extension on the pivot stem to  raise
the motor above the grain during the first stages of cleaning. |
||||
