 |
Farm
Grain Bin Roofs
GSI
fabricates all farm grain bin roofs out of prime, high tensile, G-90 galvanized
steel. The higher tensile steel adds up to 20% more strength, with
no extra weight, which is critical in clear span structural design.
|
|
Farm
Bin Specifications
--------------------
Farm Grain Bins
--------------------
Farm Grain Bin Roofs
--------------------
Easy Grain Bin Access
--------------------
Grain Bin Flooring
--------------------
Grain
Aeration and Conditioning
Overlapping
Roof Panels
Roof ribs are taller, fully double lapped and have four extra
reinforcing ledges providing increased strength and unbeatable weather
protection.
Power Roof
Exhausters
GSI also offers a 2HP, 24" diameter power roof exhauster
for situations requiring greater airflow.
|
| |
 |
|
Large Peak
Openings
A
large 30 inch diameter peak opening allows for fast filling, easy
access to overhead equipment and greater air flow during drying.
GSI's hingless, galvanized cap slides on rods to open and close,
an easy and safer method, especially on windy days. When closed,
the peak cap seals tightly and is held securely closed with a spring
loaded latch.
Optimum
Ventilation
GSI
offers two unique vents to meet your ventilation requirements. The
hinged grill vent features a vertically mounted, large mesh, wire
formed screen to keep out pests and swings freely open to allow
easy release of trash buildup. The Auto-Vent is designed to reduce
"plugging" or air restriction through the use of a special
wing-shaped damper. When fans are running, air passes freely above
and below this damper allowing it to float open in mid air. The
damper drops down and closes when the fan is not in operation to
help block out wind, snow, birds, etc. from entering. Both vents
are assembled with a heavy duty locked seam and for additional protection,
a die-cut gasket is placed between the vent and roof panel to further
decrease water penetration.
 GSI
provides roof panels with an exclusive factory-prepunched, extruded
lip for each vent.
|
|
The
roof may be set to increase exhaust area for drying applications
or positioned low to help prevent the elements, debris or small
pests from entering the bin during long term storage.
