GSI International GSI
Home | About GSI | Sales & Support
Hopper/Wet Holding--|--Farm Bins --|--Farm-Com --|--Commercial Bins --|--Commercial Hopper Tanks --|--Top Dry
--> Home > Storage Systems > Farm-Com > FC Bin Roofs
Farm-Com Grain Storage Bins
GSI fabricates all roofs out of prime, high tensile, G-90 galvanized steel. The higher tensile steel adds up to 20% more strength, with no extra weight, which is critical in clear span structural design.
 


FC Specifications
--------------------
Farm-Com Bins
--------------------
Farm-Com Bin Roofs
--------------------
Easy Bin Access
--------------------
Flooring
--------------------
Grain Aeration and Conditioning

 

Overlapping Roof Panels
Overlapping Roof Panels
Roof ribs are taller, fully double lapped and have four extra reinforcing ledges providing increased strength and unbeatable weather protection.


Optional Roof Rings
Optional full circle roof rings are available for additional convenience when working on or inspecting the tank roof.

   
 

Bin Roof Panels

 

Weather Resistant Roofs
Roof eave clearance can be easily set at the time of installation with the use of GSI eave clips. Eave Clearance AdjustmentThe roof may be set to increase exhaust area for drying applications or positioned low to help prevent the elements, debree or small pests from entering the bin during long term storage.

 
         
  Large Peak Openings  

Large Peak Openings
A large 30 inch diameter peak opening allows for fast filling, easy access to overhead equipment and greater air flow during drying. GSI's hingless, galvanized cap slides on rods to open and close, an easy and safer method, especially on windy days. When closed, the peak cap seals tightly and is held securely closed with a spring loaded latch.

Optimum Ventilation
GSI offers two unique vents to meet your ventilation requirements. The hinged grill vent features a vertically mounted, large mesh, wire formed screen to keep out pests and swings freely open to allow easy release of trash buildup. The Auto-Vent is designed to reduce "plugging" or air restriction through the use of a special wing-shaped damper. When fans are running, air passes freely above and below this damper allowing it to float open in mid air. The damper drops down and closes when the fan is not in operation to help block out wind, snow, birds, etc. from entering. Both vents are assembled with a heavy duty locked seam and for additional protection, a die-cut gasket is placed between the vent and roof panel to further decrease water penetration. GSI also provides roof panels with an exclusive factory-prepunched, extruded lip for each vent.

Power Roof ExhausterGSI also offers a 2HP, 24" diameter power roof exhauster for situations requiring greater airflow.

 
       
 

Grilled Vent

Grilled VentAuto Vent
Grilled Vent----------Auto Vent

   

 

FC Continued >>


Farm-Com Specifications | Farm-Com Bin Roofs | Easy Bin Access
Flooring | Grain Aeration and Conditioning

Hopper/Wet Holding | Farm Bins | Farm-Com | Commercial Bins | CHT | Top Dry

Grain Storage | Grain Drying and Conditioning | Material Handling
Home | About GSI | Sales & Support | FAQ's