|Capacities/HR||Up to 2,176 bph Dry & Cool @ 5 pt. removal|
|Fuel||LP or Natural Gas|
|Electrical||1 and 3 phase|
|Native cooling heat and aeration air Recovery|
Introducing TopDry Terminal, bringing increased control and access to TopDry settings and historical data. TopDry Terminal is the standard control for AutoFlow and AutoBatch TopDrys, and is available as an option on Manual Batch TopDrys.
Utilizing the same top of the line, Allen Bradley CompactLogix PLC used in our Zimmerman Tower Dryers, the TopDry Terminal features an easy-to-read, large color touch-screen. WatchDog remote monitoring and control is standard for the first time on TopDry with the TopDry Terminal (owner supplied internet connection required). The system uses advanced graphics and animation to give a visual representation of the TopDry’s operation, and these same animations are also used remotely via WatchDog.
The TopDry Terminal is completely automated with full control over the fill system, fan(s), heater(s) and dump chutes with monitoring and safety equipment in place. It can be controlled by straight-time, grain temperature using four electronic temperature sensors or a combination of both. With the microprocessor-based AutoFlow System, you can control two fans and heaters, two separate load augers and two aeration fans. The system will indicate the cause of any malfunction and automatically shut down.
Our TopDry Dryers are built to streamline your operation with easy maintenance and optimization. A shallow layer of grain on a peaked floor just under the roof allows TopDry to achieve airflows similar to Portable Dryers at low static, while simultaneously providing capacities not available in any other bin based dryer. Fan units are located on the ground via ductwork for easy operation and maintenance. All cooling airflow and heat is recovered and recycled into the air and heat from the main fans, increasing capacity and providing the best efficiency possible. No other dryer can dry more efficiently than TopDry.
GSI was the first to put the fan units on the ground for easy operation and maintenance, and also ensuring air and heat are completely mixed for even drying and peak efficiency. Fan units can be parallel or perpendicular to the bin to conform to available room and direct low level noise away from the operation area; the lower section automatically adjusts for height and any variation in pad height over the years.
Designed and built by GSI, our chute controller uses a VFD drive for dependability and durability. By using a heavy chain we eliminate bending damage to the cable in this key area. This along with large diameter pulleys at other bend points results in a cable life of over 20 years.
One size does not fit all when it comes to drying grain, and that’s why GSI features a complete lineup of grain dryers. With the ability to dry in or out of bin, batch or continuous flow we have the dryer to fit your needs and maximize your profitability.
To see relevant specifications for your business, provide the information to the right:For a full list of all specifications, view the brochure.
Looking for more information on GSI TopDry? Download our latest product brochure to learn more about grain bin options from GSI. Looking for more information on the mechanics of a specific dryer, or need the manual for your current model? Download your model specific manual below.Download Brochure Download Manual
"The GSI TopDry works well and you don’t have to babysit it"John Whaley
“I am the type of farmer that does my homework; I crunched the numbers and worked with my resources to develop a plan,” said Whaley. He wanted a plan that would not only be faster and more convenient, but also improve his farm’s profitability. His goal was to use his storage system to capture the market basis when crop prices were good. If the prices weren’t there, the carry would be the important part. Through his research he was able to show that a new system would pay for itself and the yield, quality, speed and convenience would all be added benefits. “It was all about maximizing my farm’s profit,” said Whaley.Full Story
"We’ve been with GSI since the 1950s"Clint McLeod - BriMac Farms
For the past 20 years, we’ve dried all our corn on farm. We have one of the original TopDry systems. When we are running at our best, we are drying and moving corn quickly. About five years ago we added a loading bin so we could fill a semi in three minutes. It used to take 30 minutes when we used an auger. When we break it down, we can get an extra round a day or so. We are looking to be as efficient as possible, especially knowing our farm is set to continue expanding.Watch Video