Search by Category:
All
Farm     Commercial
Brochures     Manuals

Bucket Elevator
Literature Downloads:

Brochure Download

Manual Download


Bucket Head Features:

  • Two piece hood for interior accessibility

  • Full radius contoured hood to minimize wear and improve material discharge flow

  • Machined, UHMW shaft seals

  • Heavy-duty, crowned face, double disc drum pulley with SOFR (static conductive, oil resistant and fire retardant) lagging

  • Weather tight internal lip seal between head housing and hood to eliminate moisture problems

  • Hinged pulley lagging service doors on both sides of the head housing

  • Boot Section Features:

  • Externally mounted pillow block bearings

  • Belt tension take-up screws utilizing corrosion resistant acme threaded rod

  • Machined, full length UHMW shaft seal at take-up plate bearing surface

  • Easy access cleanout doors on each end

  • Removable panel at boot top, between trunks, can be adapted to dust collection equipment

  • Standard boot construction of heavy gauge steel and bolted structural angle iron frame with vertical stiffeners

  • Trunking Features:

  • Powder coated 12 gauge (2.65 mm) steel construction and
    heavy-duty 10 gauge (3.41mm) steel with continuous butt weld seams to reduce corrosion from moisture and dust accumulation.
    Galvanized 14 gauge (1.9 mm) steel bolted construction

  • Fixture welded, structural angle iron flanges are continuously welded on the outside and stitch welded on the inside

  • Maintenance friendly 10’ (3048 mm) inspection section with
    9’ (2743.2 mm) long opening at both front and back. Front and back panels can be removed in 3’ (914.4 mm) increments. The inspection door can be located in 6 different locations

  • Unique bolted tie angle design provides rigidity, squareness to trunking and is independent of flange bolts

  • Durable, SOFR (static conductive, oil resistant and fire retardant) rubber belting

  • Related Products
    and Accessories:

    Conveyors

    Distributors

    Farm Bins



    > Home > Farm > Material Handling > Bucket Elevators

    Bucket Elevators

    Bucket Elevators

    GSI’s Bucket Elevators are engineered to perform and built tough to provide years of reliable service. Whether your business is industrial or agricultural, whether your requirements are for receiving or unloading, pre-processing or post processing, count on GSI for your material handling needs.

    Our line of bucket elevators are highly corrosion resistant and made with either a galvanized finish or a powder coat finish for lasting durability and superior appearance.


    Elevator Heads

    Bucket Elevator Heads
    GSI bucket elevator heads feature a two piece hood for easy interior accessiblity. The hood is contoured to a full radius to minimize wear and improve material dishcarge flow. Large service doors are located on both sides of the hood on models 36" and larger.

    Elevator heads are weather tight with an internal lip seal between the head housing and hood to eliminate moisture problems. Includes bearing plates with vertical jack bolts for more accurate final installation alignment. Also includes a fully adjustable throat plate, and hinged pulley lagging service doors on both sides of the head housing.


    Bucket Elevator Boots

    Bucket Elevator Boots
    Our elevator boots use a structural iron frame construction for solid support throughout the boot. All stiffeners and frames are powder coat finished before assembly for maximum corrosion resistance. Boot sections include externally mounted pillow block bearings. Belt tension take-up screws utilize corrosion resistant acme threaded rod.

    Elevator boots feature easy access cleanout doors on each end. The removable panel at boot top, between trunk, can be adapted to included dust collection equipment. Standard boot construction of heavy gauge steel and bolted structural angle iron frame with vertical stiffeners for maximum stability.


    Trunking
    Powder coated 12 gauge steel construction and heavy-duty 10 gauge steel with continuous butt weld seams to reduce corrosion from moisture and dust accumulation. Galvanized 14 gauge steel bolted construction, along with fixture welded, structural angle iron flanges are continuously welded on the outside and stitch welded on the inside for supreme durability.

    Maintenance friendly 10' inspection section with 9' long opening at both front and back. Front and back panels can be removed in 3' increments. The inspection door can be located in 6 different locations for ultimate flexibility. Unique bolted tie angle design provides stability and squarenss to trunking and is independent of flange bolts. Rubber belting is durable, static conductive, oil resistant and fire retardant.


    Specifications

    BUCKET ELEVATORS SPECS    Bucket Elevator
    MODEL
    BPH
    CFH
    MTH
    Pulley
    RPM
    FPM
    Bucket Size
    Bucket Spacing
    Trunking Size
    15P16/15G16
    1500
    1875
    38
    16
    95
    423
    9 X 5
    9
    10 X 16
    20P16/20G16
    2000
    2500
    51
    16
    95
    423
    9 X 5
    7
    10 X 16
    25P16/25G16
    2500
    3125
    63
    16
    95
    423
    9 X 6
    8
    10 X 16
    30P16/30G16
    3000
    3750
    76
    16
    95
    423
    9 X 6
    6.5
    10 X 16
    30P24/30G24
    3000
    3750
    76
    24
    73
    478
    10 X 6
    8
    10 X 16
    40P24/40G24
    4000
    5000
    101
    24
    73
    478
    11 X 6
    7
    10 X 16
    50P24/50G24
    5000
    6250
    127
    24
    73
    478
    11 X 6 Lp
    5.5
    10 X 16
    56P24/56G24
    5600
    7000
    142
    24
    73
    478
    11 X 6 Lp
    5
    10 X 16
    50P30/50G30
    5000
    6250
    127
    30
    67
    544
    13 X 6
    8
    12 X 18
    60P30/60G30
    6000
    7500
    152
    30
    67
    544
    13 X 7
    9
    12 X 18
    70P30/70G30
    7000
    8750
    177
    30
    67
    544
    13 X 7
    8
    12 X 18
    50P36/50G36
    5000
    6250
    127
    36
    64
    620
    12 X 6
    8
    12 X 18
    60P36/60G36
    6000
    7500
    152
    36
    64
    620
    11 X 7
    8.5
    12 X 18
    70P36/70G36
    7000
    8750
    177
    36
    64
    620
    13 X 7
    9
    12 X 18
    75P36/75G36
    7500
    9375
    191
    36
    64
    620
    13 X 7
    8.5
    12 X 18
    80P36/80G36
    8000
    10,000
    204
    36
    64
    620
    13 X 7
    8
    12 X 18
    100P36/100G36
    10,000
    12,500
    255
    36
    64
    620
    13 X 7 Lp
    6
    12 X 18
    80P42/80G42
    8000
    10,000
    204
    42
    60
    675
    14 X 7
    9
    14 X 22
    100P42/100G42
    10,000
    12,500
    255
    42
    60
    675
    14 X 8
    10
    14 X 22
    120P42/120G42
    12,000
    15,000
    306
    42
    60
    675
    16 X 8
    10
    14 X 22
    140P42/140G42
    14,000
    17,500
    355
    42
    60
    675
    16 X 8
    9
    14 X 22
    150P42/150G42
    15,000
    18,750
    382
    42
    60
    675
    16 X 8 Lp
    7.5
    14 X 22
    200P42/200G42
    20,000
    25,000
    510
    42
    60
    675
    20 X 8 Lp
    7
    14 X 26
    140P48/140G48
    14,000
    17,500
    355
    48
    56
    720
    16 X 8
    9.5
    14 X 26
    150P48/150G48
    15,000
    18,750
    382
    48
    56
    720
    18 X 8
    9.5
    14 X 26
    160P48/160G48
    16,000
    20,000
    405
    48
    56
    720
    18 X 8
    9
    14 X 26
    200P48/200G48
    20,000
    25,000
    510
    48
    56
    720
    20 X 8 Lp
    7.5
    14 X 26
    250P421
    25,000
    31,250
    637
    42
    60
    675
    (2) 14 X 8 Lp
    7.5
    14 X 38
    300P421
    30,000
    37,500
    760
    42
    60
    675
    (2) 16 X 8 Lp
    7.5
    14 X 42
    400P421
    40,000
    50,000
    1013
    42
    60
    675
    (2) 20 X 8 Lp 
    7
    14 X 50
    250P481
    25,000
    31,250
    637
    48
    56
    720
    (2) 14 X 8
    9
    14 X 38
    300P481
    30,000
    37,500
    760
    48
    56
    720
    (2) 16 X 8
    9
    14 X 42
    400P481
    40,000
    50,000
    1013
    48
    56
    720
    (2) 20 X 8 Lp
    7.5
    14 X 50
    400P481
    40,000
    50,000
    1013
    48
    56
    720
    (3) 16 X 8
    9.5
    14 X 60
    500P481
    50,000
    62,500
    1267
    48
    56
    720
    (3) 16 X 8
    7
    14 X 60
    500P481
    50,000
    62,500
    1267
    48
    56
    720
    (3) 20 X 8
    9.5
    16 X 72
    600P481
    60,000
    75,000
    1520
    48
    56
    720
    (3) 20 X 8 Lp
    7.5
    16 X 72

    1Powder Coated Only

    Capacities based on dry, free flowing, granular material with proper loading and unloading conditions at 45#/CF. (721kg/m3) using conservative cup capacities per manufacturer’s recommendations.

    The raw material gauge specifications refer to hot rolled steel. For galvanized steel requirements the specifications are identical, except 8 Ga. (4.26mm) galvanized steel replaces 7 Ga. (4.55mm) hot rolled steel.

    General specifications and dimensions are subject to change without notice.

    General specifications and dimensions are intended to provide sales assistance and preliminary guide to system layout only.