Home Grain Products Material Handling Chain Conveyors VersaLoop

Round tube chain conveyor

Capacities from 4,000 to 15,000 BPH (101.6 to 381 MTH)

VersaLoop

Round tube chain conveyor

Capacities from 4,000 to 15,000 BPH (101.6 to 381 MTH)

Highlights

  • Tubes available in 8″, 10″, 12″ and 14″ diameters.
  • Maximum length of 325′ (99.06 m)
  • Can be used in multiple applications in your systems making grain movement easier than ever and to minimize your maintenance needs.
  • Inclines up to 60 degrees to load taller bins.
  • UHMW paddle material gently moves grain.

Brochure

Manuals

Find a Dealer

New Drive-Over Hopper

Maximum Versatility

Designed to maximize space and grain handling efficiency at your facility

  • 4,000 to 15,000 BPH models available
  • Available in 5’ and 10’ lengths
  • Modular design for maximum versatility
  • Use with horizontal or inclined VersaLoops
  • Offer 8”, 10”, 12” and 14″ tube diameters
drive-over-hopper.jpg

Built to Perform

Direct-Drive Configuration

Low maintenance

Direct drive configuration reduces maintenance needs from traditional belts and pulleys. All serviceable parts are located at the drive end allowing easy access in service situations and eliminating the need to climb multiple bins in horizontal applications.

Low maintenance

Options

Bend Sections

30-degree or 45-degree bend section available. Offers more flexibility to maximize space and efficiency. Available in tube diameters of 8, 10 and 12 inches. Capacity to move 15,000 bushels per hour. Plastic paddles are gentle on grain.

Bend Sections

Options

Accessories

The VersaLoop can be used with any of our accessory offerings including by-pass inlets, inlet hoppers, discharge spouts, and head gates.

Accessories

Specifications

Tube DiameterCapacity
8″ (203.2 mm)up to 4,000 BPH (101.6 MTH)
10″ (254.0 mm)up to 6,000 BPH (152.4 MTH)
12″ (304.8 mm)up to 10,000 BPH (254.0 MTH)
14″ (355.6 mm)up to 15,000 BPH (381 MTH)

Click + to expand specifications for each diameter.

8″ (203.2 mm) Diameter


Maximum Lengths

Required HPInclineMax. Lengths
5Horiz.62’
15°39′
30°27′
45°21′
60°19′
10Horiz.121’
15°80′
30°55′
45°42′
60°38′
15Horiz.184′
15°119′
30°82′
45°62′
60°57′
20Horiz.250′
15°158′
30°109′
45°83′
60°76′
25Horiz.313′
15°198′
30°136′
45°103′
60°95′

VersaLoop specifications listed are based off of dry, free flowing grain.
Lengths listed are maximum, and must be followed.
If angled operation above 50 degrees is required, you will see a reduction in capacity and performance.


Maximum Spans with No Trussing Required

Wall ThicknessMax. Span
14 ga.44’
12 ga.48′
10 ga.51′
7 ga.53′

VersaLoop is designed so that limited supports are required. However, above table showing maximum unsupported spans must be followed.


10″ (254.0 mm) Diameter


Maximum Lengths

Required HPInclineMax. Lengths
10Horiz.82’
15°54′
30°36′
45°28′
60°25′
15Horiz.125’
15°83′
30°55′
45°42′
60°39′
20Horiz.168′
15°108′
30°74′
45°56′
60°52′
25Horiz.210′
15°136′
30°92′
45°70′
60°65′
30Horiz.255′
15°162′
30°112′
45°85′
60°78′

VersaLoop specifications listed are based off of dry, free flowing grain.
Lengths listed are maximum, and must be followed.
If angled operation above 50 degrees is required, you will see a reduction in capacity and performance.

Maximum Spans with No Trussing Required

Wall ThicknessMax. Span
12 ga.56′
10 ga.59′
7 ga.60′

VersaLoop is designed so that limited supports are required. However, above table showing maximum unsupported spans must be followed.

12″ (304.8 mm) Diameter


Maximum Lengths

Required HPInclineMax. Lengths
15Horiz.82’
15°53′
30°36′
45°28′
60°25′
20Horiz.109’
15°71′
30°49′
45°37′
60°34′
25Horiz.136′
15°88′
30°61′
45°47′
60°42′
30Horiz.163′
15°106′
30°73′
45°55′
60°51′
40Horiz.217′
15°141′
30°97′
45°74′
60°68′
50Horiz.272′
15°176′
30°122′
45°92′
60°85′
60Horiz.325′
15°210′
30°146′
45°111′
60°102′

VersaLoop specifications listed are based off of dry, free flowing grain.

Lengths listed are maximum, and must be followed.

If angled operation above 50 degrees is required, you will see a reduction in capacity and performance.

Maximum Spans with No Trussing Required

Wall ThicknessMax. Span
12 ga.64′
10 ga.67′
7 ga.70′

VersaLoop is designed so that limited supports are required. However, above table showing maximum unsupported spans must be followed.

14″ (355.6 mm) Diameter


Maximum Lengths

Required HPInclineMax. Lengths
20Horiz.80′
15°52′
30°40′
45°34′
60°32′
25Horiz.99′
15°65′
30°50′
45°43′
60°39′
30Horiz.119′
15°77′
30°60′
45°51′
60°47′
40Horiz.159′
15°103′
30°80′
45°68′
60°63′
50Horiz.199′
15°129′
30°100′
45°85′
60°79′
60Horiz.239′
15°155′
30°120′
45°102′
60°95′
75Horiz.298′
15°194′
30°150′
45°128′
60°118′

VersaLoop specifications listed are based off of dry, free flowing grain.

Lengths listed are maximum, and must be followed.

If angled operation above 50 degrees is required, you will see a reduction in capacity and performance.

Maximum Spans with No Trussing Required

Wall ThicknessMax. Span
10 ga.66′
7 ga.72′

VersaLoop is designed so that limited supports are required. However, above table showing maximum unsupported spans must be followed.