This sampler is constructed of carbon steel with 5/16” (7.94 mm) EMBU lining. Standard features include steel slide plate, slide plate cam followers, fabricated box slide plate, bolt-in pelican, heavy-duty drive, large inspection door and flip out dust seals. Electric drive is standard. GCE Cross-Cut Samplers are FGIS and CGC approved.

The internal pelican traverses through the material stream to obtain an accurate sample and moves out of the stream when not taking a sample. The unit features dust tight design with heavy gauge steel, 5/16" EMBU liners and replaceable cutter blades on the pelican. Pelicans can be either 45° or 60° styles depending upon the flow characteristics of the material. Electric drive is standard. GRE Rotary Cross-Cut Samplers are FGIS and CGC approved.

This sampler features easy installation and simple operation with one moving main part. Adjustable sampling frequency with automatic or manual operation is standard. When activated, the slotted, stainless steel sample tube enters the product stream and takes a sample. The sample then flows by gravity to a sealed container. When not sampling, the sample tube is retracted and out of the product stream. Drives can be electric, pneumatic or hydraulic. Not legal for trade.

All models feature sample delivery by gravity or pneumatics and are custom designed to meet your operation’s needs. Features include internal access for serviceability, rugged heavy-gauge steel construction, heavy-duty drive components, abrasion-resistant liners at all wear points and replaceable cutter blades. These models are designed as “drop-in” models or as complete discharge hoods. The pelican rests behind the dust seal and out of the material stream when not operating. Electric drive is standard. Belt End Cross Cut Samplers are FGIS and CGC approved.