Home Grain Products Conditioning Continuous Flow Dryers Mixed Flow Dryers

Make More When it Matters Most

Mixed Flow Dryer

Make More When it Matters Most

Highlights

  • Reduce downtime and maintain capacity with no screens to clean.
  • Dry multiple crops without changeover or loss of capacity.
  • Modular design grows with your operation.
  • Lower airflow rates maximize grain quality and improve fuel efficiency.
  • Centrifugal fans for high efficiency drying.
  • Available in LP and natural gas.
  • Load with a standard leveling auger and unload with dual 7″ meter rolls that supply grain to a single drag discharge conveyor.

Specifications

Brochure

Manuals

Find a Dealer

Introducing the GSI Mixed Flow Grain Dryer

Built to Perform

Multi-zone Temperature

Independently controlled modules allow for multi-zone temperature as well as the ability to run full heat or dry/cool modes.

Multi-zone Temperature

Specifications

1600 Model Mixed Flow Dryers

1608161216141616161816201624
Drying Capacity (BPH), Shelled Corn1
Dry and Cool 30% to 15%3404707007508009101,180
Dry and Cool 25% to 15%4407309009601,0301,1601,500
Dry and Cool 20% to 15%7101,1801,4501,5501,6701,8902,440
Full Heat 30% to 15%25908901,0601,1901,3401,4701,800
Full Heat 25% to 15%27101,0601,2701,4301,6001,7702,170
Full Heat 20% to 15%21,0601,5801,8902,1302,3802,6303,220
Total Holding Cap. (Auger Fill)1,0371,4051,5891,7731,9572,1412,911
Total Holding Cap. (Gravity Fill)1,0481,4161,6001,7841,9682,1522,922
Grain Column Holding Cap. (bu.)7361,1041,2881,4721,6561,8402,208
Top Auger (Loading)5 HP5 HP5 HP5 HP5 HP5 HP5 HP
Discharge Conveyor (Unloading)5 HP5 HP5 HP5 HP5 HP5 HP5 HP
Meter Roll Drive.75 HP.75 HP.75 HP.75 HP.75 HP.75 HP.75 HP
Installed Length27’9″27’9″27’9″27’9″27’9″27’9″27’9″
Installed Width9’2″9’2″9’2″9’2″9’2″9’2″9’2″
Installed Height (Auger)31’5″39’5″43’5″47’5″51’5″55’5″63’5″
Installed Height (Gravity Fill)32’3″40’3″44’3″48’3″52’3″56’3″64’3″
Heaters (Max BTU) (mmBTU)10.51519.51822.522.527
Centrifugal Fans(2) 15 HP*(3) 15 HP*(2) 30 HP & (1) 15 HP(4) 15 HP*(2) 30 HP & (2) 15 HP(5) 15 HP*(6) 15 HP*
Full Load Amps (Fan(s), load Auger, Discharge Conveyor)3
Full Load Amps (Fan(s), load Auger, Discharge Conveyor)3
Three Phase, 208 V.119161244203286244265

1 – Capacities listed are wet bushels, for mature unfrozen #2 yellow shelled dent corn at listed moisture content and are estimates based on drying principles, field results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fines, adverse weather conditions, etc.

2 – Grain discharged hot from the dryer will result in a final moisture content of 15% after cooling in the bin.

3 – Full Load Amps: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load.

* – Available in single phase.

2400 Model Mixed Flow Dryers

2408241224142416241824202424
Drying Capacity (BPH), Shelled Corn1
Dry and Cool 30% to 15%4908109601,0701,1201,3001,580
Dry and Cool 25% to 15%6301,0401,2301,3601,4401,6602,030
Dry and Cool 20% to 15%1,0201,6902,0002,2202,3402,7003,300
Full Heat 30% to 15%28501,2701,4601,7301,8802,1102,480
Full Heat 25% to 15%21,0201,5201,7502,0802,2602,5302,980
Full Heat 20% to 15%21,5102,2602,6103,0903,3603,7704,440
Total Holding Cap. (Auger Fill)1,5642,1162,3922,6683,0433,4534,013
Total Holding Cap. (GRAVITY Fill)1,6112,1632,4392,7152,9913,2674,060
Grain Column Holding Cap. (BU.)1,1041,6561,9322,2082,4842,7603,312
Top Auger (Loading)10 HP10 HP10 HP10 HP10 HP10 HP10 HP
Discharge Conveyor (Unloading)5 HP5 HP5 HP5 HP5 HP5 HP5 HP
Meter Roll Drive.75 HP.75 HP.75 HP.75 HP.75 HP.75 HP.75 HP
Installed Length35’9″35’9″35’9″35’9″35’9″35’9″35’9″
Installed Width9’2″9’2″9’2″9’2″9’2″9’2″9’2″
Installed Height (Auger)31’5″39’5″43’5″47’5″51’5″55’5″63’5″
Installed Height (Gravity Fill)35’0″43’0″47’0″51’0″55’0″59’0″67’0″
Heaters (Max BTU) (mmBTU)12.7519.523.5273133.840.6
Centrifugal Fans(2) 30 HP(3) 30 HP(2) 40 HP & (1) 30 HP(4) 30 HP(2) 40 HP & (2) 30 HP(5) 30 HP(6) 40 HP
Full Load Amps (Fan(s), load Auger, Discharge Conveyor)3
Full Load Amps (Fan(s), load Auger, Discharge Conveyor)3
Three Phase, 208 V.216300355383438466480
Three Phase, 230 V.206285338364416443455
Three Phase, 460 V.99137162174199212232
Three Phase, 575 V.79109130140160170183

1 – Capacities listed are wet bushels, for mature unfrozen #2 yellow shelled dent corn at listed moisture content and are estimates based on drying principles, field results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fines, adverse weather conditions, etc.

2 – Grain discharged hot from the dryer will result in a final moisture content of 15% after cooling in the bin.

3 – Full Load Amps: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load.

3200 Model Mixed Flow Dryers

3208321232143216321832203224
Drying Capacity (BPH), Shelled Corn1
Dry and Cool 30% to 15%6201,0401,2201,3301,4101,6702,050
Dry and Cool 25% to 15%8001,3301,5601,7101,8002,1302,620
Dry and Cool 20% to 15%1,3002,1602,5302,7702,9293,4604,250
Full Heat 30% to 15%21,0801,6201,8302,1702,3702,7003,200
Full Heat 25% to 15%21,3001,9502,1902,6102,8403,2503,830
Full Heat 20% to 15%21,9302,9003,2603,8904,2304,8305,710
Total Holding Cap. (Auger Fill)2,0922,8283,1963,5643,9324,3005,156
Total Holding Cap. (GRAVITY Fill)2,1982,9343,3023,6704,0384,4065,262
Grain Column Holding Cap. (BU.)1,4782,2172,5862,9563,3253,6954,440
Top Auger (Loading)15 HP15 HP15 HP15 HP15 HP15 HP15 HP
Discharge Conveyor (Unloading)5 HP5 HP5 HP5 HP5 HP5 HP5 HP
Meter Roll Drive.75 HP.75 HP.75 HP.75 HP.75 HP.75 HP.75 HP
Installed Length43’9″43’9″43’9″43’9″43’9″43’9″43’9″
Installed Width9’2″9’2″9’2″9’2″9’2″9’2″9’2″
Installed Height (Auger)31’5″39’5″43’5″47’5″51’5″55’5″63’5″
Installed Height (Gravity Fill)37’10”45’10”49’10”53’10”57’10”61’10”69’10”
Heaters (Max BTU) (mmBTU)14.7523.526.5353843.852.5
Centrifugal Fans(2) 40 HP(3) 40 HP(2) 50HP & (1) 40 HP(4) 40 HP(2) 50 HP & (2) 40 HP(5) 40 HP(6) 40 HP
Full Load Amps (Fan(s), load Auger, Discharge Conveyor)3
Full Load Amps (Fan(s), load Auger, Discharge Conveyor)3
Three Phase, 208 V.286397452508563619654
Three Phase, 230 V.272377430483535588645
Three Phase, 460 V.130180206231256281327
Three Phase, 575 V.104144165185205225271

1 – Capacities listed are wet bushels, for mature unfrozen #2 yellow shelled dent corn at listed moisture content and are estimates based on drying principles, field results and computer simulation. Variance may occur due to grain’s physiological factors (kernel size, chemical composition, variety, maturity), excessive fines, adverse weather conditions, etc.

2 – Grain discharged hot from the dryer will result in a final moisture content of 15% after cooling in the bin.

3 – Full Load Amps: Fan(s) & Dryer Load & Unload motor name plate amperages + 5 for control & VFD load.